The Junk Wizards
Same-Day Available

Hot Tub Removal in Simi Valley

That old spa in the backyard isn't getting any lighter. We pull it apart, haul every piece, and leave your yard clean — same-day available.

Free Quote

Same-day service • No hidden fees
We do all the heavy lifting

Book Your Pickup

Msg & data rates may apply. Reply STOP to opt out.

or
Call (805) 316-1610

Simi Valley Hot Tub Removal That Actually Gets Done

Plenty of Simi Valley backyards have a hot tub that stopped working years ago. It might have been the selling point when the house was built in Wood Ranch or Big Sky — a nice spa next to the pool, a spot to relax after work. But pumps fail, heaters corrode, shells crack, and eventually the tub becomes a 700-pound piece of yard clutter that nobody wants to deal with. Leaves pile up inside it. The cover deteriorates. The concrete pad underneath starts to crack. And every weekend, it sits there reminding you of a project you don't have the tools or the truck to finish.

The Junk Wizards removes hot tubs across Simi Valley including Wood Ranch, Big Sky, Madera, Santa Susana, Rancho Simi, Bridle Path, Knollwood, and everywhere along Madera Road and Cochran Street. We show up with reciprocating saws, protective gear, and a truck big enough to take the whole thing in one trip. The shell gets cut into sections that fit through your side yard or gate, every piece gets loaded — foam, fiberglass, acrylic, plumbing, jets, pump, heater, cabinet — and we sweep or rake the area before we leave.

Simi Valley's suburban layout means most homes have backyard access through a side gate, but the clearance varies. Older homes near Madera Road might have 30-inch gate openings. Newer builds in Wood Ranch often have wider access but the tubs are set into raised decks or custom hardscape. Properties in Big Sky sometimes have the spa on a slope overlooking the valley. We've handled all of these setups, and access challenges don't change our approach — they just change how we cut the sections.

Metal components from the tub — pump housings, heater cores, copper wiring, steel frames — get separated at the truck and taken to Simi Valley Recycling Center for processing. The fiberglass shell, spray foam insulation, and acrylic panels go to the appropriate disposal facility. Keeping recyclable metal out of the landfill is worth the extra sorting time, and it's something we do on every job.

Our base in Thousand Oaks puts us about 15 minutes from central Simi Valley via the 118 or Madera Road. Same-day appointments are common, especially for morning calls. If you've been putting off this project for months or years, one phone call to (805) 316-1610 gets it scheduled, and most hot tub removals are done in two to three hours.

Concrete pad removal is available the same day. If you're reclaiming backyard space for landscaping, a new patio, or just want the slab gone, we break it up and haul the concrete along with the tub. The pad removal is included in the upfront quote — not added as an extra charge when we're already on-site.

Hot tub being broken down and removed from a Simi Valley backyard

We handle the demo, haul-away, and cleanup in a single visit.

Our Hot Tub Removal Process in Simi Valley

1

Confirm Power Is Off

We start by verifying the hot tub's 220-volt electrical circuit is properly shut off at the breaker panel. This is non-negotiable — we won't start cutting until it's confirmed dead. If you want an electrician to disconnect the wiring beforehand, that's ideal but not required.

2

Cut the Shell and Remove in Sections

Using reciprocating saws, we cut the shell into pieces that fit through gates and side yards. Cabinet panels come off first, then we section the acrylic/fiberglass shell and foam insulation. In Wood Ranch and Big Sky properties where tubs are built into decks, we work around the existing structure to avoid damaging anything that's staying.

3

Separate Materials and Load the Truck

Metal components — pump, heater, copper, steel — go to Simi Valley Recycling Center for processing. The shell, foam insulation, and cabinet material are hauled for proper disposal. We sweep and rake the area clean. If the concrete pad is coming out, we break it up and load it the same trip.

We had an excellent experience working with Junk Wizards. Justin contacted us and gave us a quote super fast. He was super easy to work with, punctual, hard working, honest. He was able to clear yard debris and junk out of our backyard and haul it away the same day we contacted him. You have a loyal customer!
R
Rebeccah F.
★★★★★
Thumbtack
Starting at
$299

Hot Tub Removal Pricing in Simi Valley

Hot tub removal in Simi Valley starts at $299. Price depends on tub size, access conditions, and whether concrete pad removal is included. We quote on-site after seeing the job — what we tell you before we start is what you pay. No add-ons for cutting, hauling, or cleanup. It's all included.

Get Your Free Quote

Hot Tub Removal Across Simi Valley

We serve all of Simi Valley and the surrounding areas. Our Thousand Oaks base is a quick drive via the 118 or Madera Road, so response times are fast. Metal and recyclable components go to Simi Valley Recycling Center, and we know the local disposal options for every type of material that comes out of a hot tub.

Areas We Serve

Wood RanchBig SkyMaderaSanta SusanaRancho SimiBridle PathKnollwoodSimi HillsStrathearnRoyalSinaloa LakeMountain Gate

Near These Landmarks

Simi Valley Town CenterRonald Reagan Presidential LibraryHummingbird TrailSanta Susana Pass State Historic ParkCorriganville ParkRancho Simi Community ParkStrathearn Historical Park
Junk Wizards truck loaded with hot tub debris in Simi Valley

One truck visit, complete removal — foam, fiberglass, and all hardware.

Frequently Asked Questions

Most Simi Valley hot tub removals start at $299 and run up to $499 depending on tub size, access difficulty, and whether the concrete pad needs to come out. We quote on-site after seeing the setup. Call (805) 316-1610 for a straight number — not a phone estimate that inflates when we arrive.
We work in every neighborhood in Simi Valley — Wood Ranch, Big Sky, Madera, Santa Susana, Rancho Simi, Bridle Path, Knollwood, and the areas along Simi Valley's eastern and western corridors. The drive from our Thousand Oaks base is about 15 minutes, and we can often do same-day.
Metal components are separated at the truck and taken to Simi Valley Recycling Center. Copper, steel, and aluminum get processed for recycling. It takes a few extra minutes to sort, but it keeps usable material out of the landfill.
Not for us. Simi Valley has plenty of hillside lots — Big Sky properties often have tiered backyards with spas on the upper or lower pad. We assess the slope, plan the cut pattern, and stage the pieces for carry-out. Steep terrain changes the workflow but not our ability to get the job done.
We're careful about protecting surrounding structures. If your spa is set into a Wood Ranch deck and the decking is staying, we remove the tub without damaging the boards or framing around it. Let us know your exact setup when you call so we can plan the approach.
If the tub is in the backyard with accessible side-gate entry and the power is already off at the breaker, we can handle the job while you're at work. Just let us know the access details when you schedule, and we'll take care of the rest.
A standard hot tub removal runs two to three hours from start to cleanup. Adding concrete pad removal can push it to four hours. Difficult access — tight gates, slopes, or long carry distances — may add time. We give you a time estimate with the quote.
That's most of the tubs we pull out. Years of sitting idle means the shell may be brittle, the foam waterlogged, and the cabinet rotting — all of which actually makes the demo faster. Sun-damaged and deteriorated spas are no harder for us than newer ones.
We remove the tub and its components, but the electrical conduit and wiring running from your panel to the tub location is typically left in place. An electrician can cap or remove it afterward. We make sure the circuit is dead and safe, but we don't do licensed electrical work.
Absolutely. The old cover, the lifter mechanism, steps, any chemical storage cabinet — everything related to the spa gets loaded. Point to what needs to go and we take it.
The Junk Wizards Mascot

Get a Free Quote

Schedule Your Junk Removal Today!

Fed up with clutter? The Junk Wizards provides a stress-free solution. Request an appointment online or call us for a free quote.